NEC DT300 Series - To Originate a Call Using Speed Calling (-Station;Group); To Originate a Call Using Speed Calling - System

29
To Originate a Call Using Speed Calling
(-Station/Group)
 Press the Redial button.
Press the desired speed calling number.
LNR[*]/SPD[_ _ ] -X
4:26 PM TUE 12 FEB 2008
To Originate a Call Using Speed Calling
– System
To program Speed Calling – System key (on
one-touch speed calling key)
 Press Feature key.
 Press desired One-Touch Speed Calling key. The
LCD displays previously stored digits.
 Dial the “Speed Calling – System” access code and
the abbreviated call code.
 Press Feature again.
SET
4:26 PM TUE 12 FEB 2008
To operate from the Speed Calling – System key
 Press the “Speed Calling – System” key.
XXXX
4:26 PM TUE 12 FEB 2008
 If the DT Series does not have the “Speed Calling –
System” key, dial the “Speed Calling – System”
access code, then the abbreviated call code.
To operate from the Directory key
 Press the Directory key.
 Dial the abbreviated call code (maximum of 8 digits).
XXXX
4:26 PM TUE 12 FEB 2008