NEC DT300 Series - Call Forwarding Destination; To Save and Repeat Number

42
To Verify
 Press Speaker key. Receive extension dial tone.
 Press FD-N key or dial Call Forward-No Answer
access code.
 Display indicates destination number of call forward.
Forwarding
station
FWD 2000
4:26 PM TUE 12 FEB 2008
NOTE: Call Forwarding for Busy and No Answer may
be combined depending upon system programming.
Call Forwarding Destination
To Set
 Press Speaker key. Receive dial tone.
 Press FD-DS key or dial Call Forward Destination
access code. Receive special dial tone.
SET 2000
4:26 PM TUE 12 FEB 2008
 Dial station number to be forwarded to this line. Wait
for service set tone.
To Cancel
 Press Speaker key. Receive dial tone.
 Press FD-DC key or dial Call Forward Destination
cancel code.
CNCL
4:26 PM TUE 12 FEB 2008
 Dial station number to cancel.
 Press Speaker key. Call Forward Destination is
canceled.
To Save And Repeat A Number
To Save
 Press Speaker key.
 Dial desired telephone number.
 Press S & R key. Dialed number is now
stored. S & R LED lights.
To Repeat
 Press Speaker key.
 Press S & R key. Phone automatically redials the
programmed number.
 S & R automatically canceled. LED goes out.
NOTE: If saved number is busy or no answer is
received, to save it again, press S & R key before
hanging up.