EasyManua.ls Logo

NEC DT300 Series - Call Forwarding Features

NEC DT300 Series
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
CID Call Display
To Display Calling Party Information:
Press CID key, CID lamp lights.
Calling Party Information is displayed.
To Redisplay Calling Party Information:
While on a call press CID key to recall the Calling
Party Information.
Calling Party Information is displayed.
Call Forwarding-All Calls
To Set
Press Speaker key. Receive dial tone.
Press FD-A key or dial Call Forward-All access
code. Receive special dial tone.
Dial destination station or outside telephone number.
Receive service set tone.
FD-A LED lights (at your station if FD-A key was
used).
Press Speaker key. Call Forwarding for all calls is
set.
Forwarding
station
FWD 2000
4:26 PM TUE 12 FEB 2008
To verify(with multi-line phone)
Press Speaker key. Receive extension dial tone.
Press FD-A key or dial Call Forward-All access code.
Display indicates the station number calls are
forwarded to.
FWD 2000
4:26 PM TUE 12 FEB 2008
To Cancel
Press Speaker key. Receive dial tone.
CNCL
4:26 PM TUE 12 FEB 2008
Press FD-A key plus * or dial Call Forward-All cancel
code. Receive service set tone. LED goes out at
your station (or the phone of the sub line station).
Press Speaker key.

Table of Contents

Related product manuals