NEC DT920 - DT530 Keys and Parts Overview

3
1.
Keys And Parts for DT530
DT530
(12/24-B
UTTON WITH MONOCHROME DISPLAY)
(1) Handset
Used for sending/receiving voice.
(2) Exit Button
To exit the Menu or Help mode and go back to the
time display.
(3) Speaker
Used when originating a handsfree call.
(4) Dial Keypad
Dial the called party number or feature access
code.
(5) Hold Key
To place an internal or external call on hold.
(6) Transfer Key
Allows the station user to transfer established
calls to another station, without attendant
assistance.
(7) Speaker Key
To control the built-in speaker which can be used
for:
Hands-Free dialing/monitoring.
LED on key lights when the key is active.
* All standard IP versions include support for full
duplex hands-free mode. All TDM and IP enabled
versions are half duplex hands-free mode.
(8) Cursor Key
By using this key, you can access various
features with a simple operation.
Details on Cursor Key
(2)
(1)
(3)
(4) (5) (6) (7)
(8)
(10)
(9)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(a-1) Volume (UP) key (Four-way scroll up key)
(b) Redial key (Four-way scroll left key)
(c) Enter key
(d) Directory key (Four-way scroll right key)
(a-2) Volume (DOWN) key (Four-way scroll down key)
(b)
(d)
(a-2)
(c)
(a-1)