NEC DT920 - Repeat Redial; Caller ID

30
(1) Do not lift the handset.
(2) Press the Memo Dial key (Service Code 751:31).
Note: The stored number displays.
(3) Press Exit to return to the main LCD screen.
To cancel (erase) a stored Memo Dial number:
(1) Press the Speaker key.
(2) Press the Memo Dial key (Service Code 751:31).
Repeat Redial
To use Repeat Redial (if the outside party you call is
unavailable or busy):
(1) Place a trunk call.
Note: Listen for busy tone or Ring-No Answer.
(2) Press the Feature + Redial keys.
-OR-
(1) Press the Repeat Redial key (Service Code
751:29).
Note: The Repeat Redial key lights while you wait for
the system to redial.
(2) Press the Speaker key to hang up.
Note: The system periodically redials the call.
Note: System programming determines the waiting
time and the number of redial attempts.
(3) Lift the handset when the called party answers.
Note: When using trunks with answer supervision, the
Repeat Redial feature automatically cancels.
To cancel Repeat Redial:
(1) Press the Feature key.
(2) Press the Redial key.
-OR-
(1) Press the Repeat Redial key (Service Code
751:29).
Caller ID
Answer
Receive incoming ringing or a transferred outside call:
(1) Review the telephone display for the calling
party’s name or number.
(2) Answer the call accordingly.
Repeat Dial
Line 001 00:27
Conf Rpt Save
Cancel Repeat Dial
2-14 THU 3:15PM
List Dir ICM Prog