NEC DT920 - For Trunk Ring; Changing Your Extension Incoming Ring Tone

15
For Trunk Ring:
Dial code for the ring pattern you want to hear
(Ring1-3, Melody 4-8). If you select Ring 1-3, a second
screen prompts for the tone pattern (1-4).
(4) Press Speaker to hang up.
Changing your Extension Incoming Ring Tone
(1) Press Speaker and dial 720.
(2) Dial 1 to set Intercom ring; Dial 2 to set Trunk
ring.
(3) Dial 1 to set the Tone; Dial 2 to set the Melody;
Dial 3 to set the Download Melody.
The display below shows when INT is selected
and Program 15-02-78 is enabled
DT900 display:
DT500 display:
(4) The following is displayed when 3: Download
Melody is selected.
Displayed when ring tone setting is completed
and ring tone is played.
(5) Press Speaker to hang up.
Tone No. Tone Range
1 Ring Tone 1
2 Ring Tone 2
3 Ring Tone 3
4 Melody 4
5 Melody 5
6 Melody 6
7 Melody 7
8 Melody 8
1: INT 2: EXT
SET INCOM RING
TONE:1 MELODY:2 DL:3
SET INT INCOM RING
TONE:1 MELODY:2
SET INT INCOM RING
DL: 1-3
SET INT INCOM RING
SETTING COMPLETE
SET INT INCOM RING