NEC DT920 - Tone Override; Department Step Call; Voice over

28
To cancel all your Messages Waiting:
Note: This includes messages you have left for other
extensions and messages other extensions have left for you.
(1) Press the Speaker key.
(2) Dial 773.
(3) Hang up.
To cancel the Messages Waiting you have left at a
specific extension:
(1) Press the Speaker key.
(2) Dial 771.
(3) Dial the number of the extension you do not want
to have your messages.
Hang up.
-OR-
(1) Press the Cncl Softkey.
Tone Override
To send off hook signals to an extension busy on a call:
Note: Your extension may send off hook signals
automatically.
(1) Dial
*.
-OR-
(1) Dial 709.
(2) Press the Off Hook Signaling key (Service Code
751:33).
Note: You hear Ring Busy Tone.
Note: The called extension hears Call Alert Notification.
To answer Tone Override:
(1) Receive Tone Override.
(2) Press the Hold key and talk with the party.
Department Step Call
To make a Step Call:
(1) Place a call to a busy Department Group member.
-OR-
(1) Place a call to a Department Group pilot number.
(2) Dial Department Step Code (2) to call the next
available Department Group member.
(3) Repeat step 2 to call other Department Group
members.
Voice Over
To initiate a Voice Over to a busy extension:
(1) Press the Voice Over key (Service Code
751:48).
-OR-
(1) Dial 6.
Note: You hear an alert tone and the Voice Over key
flashes. You can talk to the called party after the alert
tone ends.
CALLING STA 12345678
2-14 THU 3:15PM
Voice MW