-9-
Service Manual CP-785A
Option Function
* Note : These Function is changed only Service Mode not Factory mode. So you must use the user s remote controller
- Change the PR. No. to 91 ==> change the sharpness to 00(min) in Picture control Menu ==> Exit the User control Menu ==> Press the
[RED],[GREEN],[MENU] quickly
- Then the Service Menu is appeared.
FUNCTION Description Remark
Option - This is the tuner option code. 0,1,2,3 :For D/W Remote controller
4,5,6,7 :For NEC Remote controller
CH LOCK ON/OFF - Channel Setting : Impossible/possible
- When this function is active, It is impossible to change
the channel data(can not enter the INSTALL menu)
Max Vol 00~43(max) - this is the limited Volume function.
- it is variable to 43(max) from 00(min).
Clock Pr. - it change the reference channel for Automatic clock setting.
SVHS ON/OFF - When SVHS is active, The AV mode is changed to SVHS mode. CP-785F can t operate the S-VHS.
It operate to the CP-785A(DTE-29/25G5TH)
AV START ON/OFF - When AV start is active, the set always start in av1 mode
(main AC switch on/off & remote controller on/off)
- In case if virgin EEPROM, the default setting is OFF.
KEY LOCK ON/OFF - When active the local keyboard can t be used.
- In case if virgin EEPROM, the default setting is OFF.
SCREEN - It is adjust screen point.
- It requires for screen adjustment at the manufacture.
DVD IN ON/OFF - When DVD IN is active, The AV mode is changed to DVD mode.
AUTO OFF ON/OFF - When AUTO OFF is active, If broadcasting signal is not present.
To Next Page
Loading...
