Management Workstation Application B-21
Problem: The server window does not display a server screen.
Probable Cause: A graphic server screen may not be displayed correctly in the
server window. The window display becomes normal when the server returns to
an MS-DOS screen.
Problem: Characters are corrupted when the server window displays a server
screen.
Probable Cause: If MS-DOS is booted in a language other than English, MWA
cannot display the messages for this language in the server correctly. Boot MS-
DOS in English mode.
Probable Cause: If the server is displaying a graphic screen, MWA may not be
able to display the screen correctly.
Problem: When an MS-DOS program is activated in English mode, the server
displays corrupted characters.
Probable Cause: If MS-DOS in the server is in English mode, MWA remote
console correctly displays messages from the MS-DOS programs in the server.
However, the server cannot display messages for other language correctly.
Problem: OS cannot be booted from the server disk.
Probable Cause: When the remote drive is set on MWA, the server is booted
from the remote drive. Cancel the remote drive setting and reset the server.
Problem: The floppy disk drive on the server cannot be used.
Probable Cause: When the remote drive is set on MWA, drive A: on the server
is assigned remote drive on the management PC. Cancel the remote drive setting
and reset the server.
Problem: MWA cannot connect to the server.
Probable Cause: Check each item in Step 7 of Creating a Server System
Generation Diskette.
To Next Page
Loading...
