2-6
Setting Up the System
4.
Lift the rack-mount server unit Figure 2-2, C onto the two support brackets
and slide it toward the rear of the rack cabinet.
!
WARNING
It is strongly recommended that two people are present
when lifting and assembling the rack-mount server unit into a
rack cabinet.
5.
Secure the front bezel to the rack cabinet's front vertical mounting rails (B)
using the four screws (E) and plastic washers (D) provided. See Figure 2-2.
A. Rear vertical mounting rail
B. Front vertical mounting rail
C Rack-mount server unit
D Four plastic washers
E Four screws
Figure 2-2. Installing the Rack-Mount Server Unit into the Rack Cabinet
To Next Page
Loading...
