4-2 Linux Setup
Setup Flow
The following flow-chart illustrates the flow of the setup procedures for the server.
Step B-2: Prepare for Installation (P.4-6)
Step B-1: Starting Setup Procedure When
Reinstalling the OS (P.4-5)
Step C-5: Set Network for NEC ESMPRO Agent (P.4-19)
Step C-4: Create Volume (P.4-19)
Step C-2: Set Dual Disk Configuration (P.4-13)
Step C-1: Set Dual LAN Card Configuration (P.4-10)
Step C-6: Back up System Information (P.4-20)
When powering on
the server the first time
When reinstalling
the OS.
Do you power on the ft series
for the first time?
Y
N
Step C-3: Connect and Configure Options (P.4-19)
Step A-1: Starting Setup Procedure When
Powering on the Server for the
First Time (P.4-3)
Step B-3: Start the Installation of Linux for NEC
Express5800/ft series (P.4-9)
Setup completed
To Next Page
Loading...
