Linux Setup 4-5
Setup Procedure When Reinstalling the OS
You can set up the NEC Express5800/ft series again using a backup CD-ROM.
IMPORTANT:
The NEC Express5800/ft series is a precision instrument. Ask maintenance personnel
with technical knowledge to install it.
When you power on the NEC Express5800/ft series for the first time after you
purchased, refer to “Setup Procedure When Powering on the NEC Express5800/ft
series for the First Time” (4-3) to set up.
The following is the procedure to reinstall the OS.
Step B-1: Starting Setup Procedure When Reinstalling the OS
The following explains the reinstallation procedure of the OS.
You need the following to install Linux for NEC Express5800/ft series.
Linux for NEC Express5800/ft series Back Up CD-ROM 1
Linux for NEC Express5800/ft series Back Up CD-ROM 2
“Password of 'root' user” leaflet
User’s Guide (Setup) (this manual)
User’s Guide
IMPORTANT: For the latest release of Linux for NEC Express5800/ft series
software, ask your sales agent.
To Next Page
Loading...
