NEC Express5800 320Lb - Chapter 5 Procedures after Completion of Installation (Continued)

5-10 Procedures after Completion of Installation
Confirmation of the Kernel Version
The following explains how to check the version of the kernel which is the core of the software
achieving fault tolerance. Perform this procedure when you need to check the version of the
operating kernel. (e.g., when you add devices to the NEC Express5800/ft series.)
A dedicated tool for checking the version is provided. Confirm the version following the procedure
below:
1. Execute the following command:
> uname -a
The version of the operating kernel is displayed.
This completes confirmation of the version.