5-6 Procedures after Completion of Installation
4. Start the control panel.
./ESMagntconf
The screen of the control panel will appear.
TIPS:
For details of the setting, refer to the User’s Guide of the NEC ESMPRO Manager.
The User’s Guide is stored on the following place of the Back Up CD-ROM 2.
/nec/esmpro_sa/doc/users.pdf
Report Setting
To report from the NEC ESMPRO Agent to the NEC ESMPRO Manager, you need to set the
method of report.
Setting of Manager (SNMP)
1. Log in the system as a root user.
2. Move to the directory where the NEC ESMPRO Agent is installed.
cd /opt/nec/esmpro_sa
3. Move to the directory where the Report Setting tool is stored.
cd bin
4. Start the Report Setting tool.
./ESMamsadm
The [Report Setting] screen will appear.
5. Select [Base Setting].
The [Base Setting] screen will appear.
To Next Page
Loading...
