NEC Express5800/GT110e-S User Manual

CONFIGRATION GUIDE – NEC Express5800/GT110e-S / Air cooling model
NEC Corporation Revision 5.0 – July 17, 2013 31
References
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
With Remote KVM
and Media License
kit
Hardware
monitoring
Temperature/hard drive
1
/fan/voltage/power
consumption/degeneration(memory/hard drive
1
)


Hardware configuration information collection


Hardware event log collection


Boot monitoring
BIOS/POST stall, Booting, OS stall, shutdown

3

3
Alerting
HW error, Boot error and OS panic
(by SNMP, E-Mail)


Remote KVM
(via LAN)
POST/BIOS setup, ROM utility

2

Panic screen, Boot screen

2,4,5

CUI-based screen (OS console)

2,5

GUI-based screen (OS console)
-

Remote control
(via LAN)
Remote reset/power on-off/ dump


Remote Power Capping


BIOS/BMC FW update


Remote BIOS setup(partial configuration only)


OS shutdown

3

3
Remote media (CD/DVD/FD/USB)
-

CLP (Command Line Protocol) (DMTF compliant)


Remote control via Web browser (multi user login
at the same time)


Scheduling (without UPS)

3

3
Maintenance
EXPRESSSCOPE® Profile key
(Backup/restore BIOS/BMC setup information)


Others
Set automatic IP address via DNS/DHCP


LDAP/Active Directory verification/user control


Clock synchronization of main unit and the RTC


Access log collection


Industry
Standard
IPMI support
2.0
2.0
1
The feature is not supported on non-hot plug 3.5-inch drive.
2
The standard serial port is not available for the feature.
3
The feature is not supported on VMware systems.
4
Monitoring boot screens is not supported on VMware systems.
5
In VMware systems, only the direct console user interface is supported.

NEC Express5800/GT110e-S Specifications

General

Brand	NEC
Model	Express5800/GT110e-S
Category	Server
Language	English