CONFIGRATION GUIDE – NEC Express5800/GT110e-S / Air cooling model
NEC Corporation Revision 5.0 – July 17, 2013 16
4.3 2.5-inch Drive Configuration
4.3.1 Embedded SATA non-RAID Controller
Product Name / Description
Embedded SATA Controller
2x 6Gb/s SATA, 2x 3Gb/s SATA
Internal SATA Cable
3x Single-SATA to mini-SAS
2.5-inch Drive Cage
3 x 2.5-inch hot plug hard drive bays
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
NOTE
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
4.3.2 Embedded SATA RAID Controller
Product Name / Description
Embedded SATA Controller
2x 6Gb/s SATA, 2x 3Gb/s SATA, RAID 0/1 capable
Internal SATA Cable
3x Single-SATA to mini-SAS
2.5-inch Drive Cage
3 x 2.5-inch hot plug hard drive bays
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
NOTE
Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
All hard drives within a RAID array should be of the same capacity and rotation speed.