To Next Page

To Previous Page

CONFIGRATION GUIDE – NEC Express5800/GT110e-S / Air cooling model

NEC Corporation Revision 5.0 – July 17, 2013 14

4.2 3.5-inch Drive Configuration

4.2.1 Embedded SATA non-RAID Controller

Category

Product Name / Description

Part Number

Storage Controller

Embedded SATA Controller

2x 6Gb/s SATA, RAID 0/1 capable

(Standard)

Cable

Internal SATA Cable

Single-SATA to Single-SATA , 2 sets

(Standard)

HDD Cage

3.5-inch Drive Cage

2 x 3.5-inch non hot plug (fixed) hard drive bays

(Standard)

Drive

2 slots available

500GB 7.2K non-Hot Plug 3.5-inch SATA HDD

1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-359

1TB 7.2K non-Hot Plug 3.5-inch SATA HDD

1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-360

2TB 7.2K non-Hot Plug 3.5-inch SATA HDD

1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-361

3TB 7.2K non-Hot Plug 3.5-inch SATA HDD

1 x 3TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-362

4TB 7.2K non-Hot Plug 3.5-inch SATA HDD

1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-396

NOTE:

 Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID

controller is required to configure RAID array for other operating systems.

 All hard drives within a RAID array should be of the same capacity.

NEC Express5800/GT110e-S User Manual

Questions and Answers: