B-4 System Setup Utility
Running the SSU
1. Turn on your video monitor and your system.
2. There are two ways to start the SSU:
n After creating an SSU diskette from the CD: Insert the SSU diskette
in drive A, and reboot your server from the diskette.
n From diskette after installing your operating system: Insert the SSU
diskette in Drive A. At the MS-DOS prompt, type a: and press Enter to
change to drive A. Type SSU and press Enter.
3. Follow the system prompts to load the SSU. When the SSU title appears on
the screen, press Enter to continue.
4. When the main window of the SSU displays, you can customize the user
interface before continuing.
System Setup Utility Main Menu Window
To Next Page
Loading...