3-8 Configuring Your System
PCI Configuration Submenus
This submenu should only be changed by qualified technical personnel.
CAUTION
Leave PCI Configuration Submenu at factory-default
settings. This submenu should only be changed by a
technically qualified person.
PCI Configuration Submenu
Feature Choices Description Your Setting
PCI Device, Embedded
SCSI Devices
Press ENTER. N/A
Option ROM Scan Enabled
Disabled
Enables option ROM scan of the selected
device. Used to enable embedded
Symbios SCSI controller
Enable Master Enabled
Disabled
Enabled selects the device as a PCI bus
master.
Latency Timer Default
0020h
0040h
0060h
0080h
00A0h
00C0h
00E0h
Minimum guaranteed time, in units of PCI
bus clocks, that a device may be master
on a PCI bus. Caution: Do not change this
setting unless you fully understand the
priority of this device on the PCI bus.
PCI Device, Slot 1 - Slot 7 Submenus
This submenu should only be changed by qualified technical personnel.
CAUTION
Leave PCI Device Submenu at factory-default settings.
This submenu should only be changed by a technically
qualified person.
PCI Device, Slot 1 - Slot 7 Submenu
Feature Choices Description Your Setting
Enable Master
Enabled
Disabled
Enables selected device as a PCI bus
master.
Latency Timer Default
020h
040h
060h
080h
0A0h
0C0h
0E0h
Minimum guaranteed time, in units of PCI
bus clocks, that a device may be master
on a PCI bus. Caution: Do not change this
setting unless you fully understand the
priority of this device on the PCI bus.
To Next Page
Loading...