NEC EXPRESS5800 LC1400 series - Status Bar; EMP Main Menu

C-8 Emergency Management Port Console
Status Bar
The status bar displays at the bottom of the current window. It contains the following
status information:
n SERVER NAME: the name of the server (stored in the Phonebook).
n LINE: the type of line connection. This would be either direct or modem.
n MODE: either Redirect of EMP, depending on whether the EMP has control of the
COM 2 port.
n LINE STATUS: gives status information on the server connection. For example, if
a server is connected, the status bar says "Connected." Otherwise, the line is blank.
EMP Main Menu
n File
 Exit - Exits the EMP.
n Connect
 Disconnect - disconnects the server connection.
 [Re]Connect - raises the connect dialog.
 A list of the five most recent connections - can click on one of the five servers
most recently connected to. A connection to the selected server is initiated.
n Action
 Power On/Off - powers the server on or off with post-power-up options.
 Reset - resets the server with post-reset options.
 SEL Viewer - opens the SEL viewer.
 SDR Viewer - opens the SDR viewer.
 FRU Viewer - opens the FRU viewer.
 Phonebook - opens the phonebook dialog.
n Help - provides version information and help topics for the EMP.