Emergency Management Port Console C-11
Reset
Selecting Reset from the Action menu generates the Reset dialog so that you can
remotely reset the server with post-reset options.
Reset Dialog
Options available in the dialog are:
n System Reset - resets the server with the selected post-reset options. This operation
is not allowed if the server is configured in RESTRICTED mode for EMP
operations.
n Option Group - sets the post-reset option that will be effective after reset. The
options are EMP active or BIOS redirection. The default selection is EMP active.
n Cancel - exits the dialog without any action taken.
n Help - displays dialog level help information.
To Next Page
Loading...