Setting Up the System 2-7
4. Lift the rack-mount server unit (C) onto the two support brackets and slide it
toward the rear of the rack cabinet.
WARNING
It is strongly recommended that two people are present
when lifting and assembling the rack-mount server unit into a
rack cabinet.
5. Secure the front bezel to the rack cabinet's front vertical mounting rails (B)
using the four screws (E) and plastic washers (D) provided.
Installing the Rack-Mount Server Unit into the Rack Cabinet
A. Rear vertical mounting rail
B. Front vertical mounting rail
C Rack-mount server unit
D Four plastic washers
E Four screws
To Next Page
Loading...