Upgrading Your System 4-3
Preparing Your System for Upgrade
Depending on the upgrade, you will need one or more of the following tools:
n Phillips screwdriver (#1 bit and #2 bit)
n Flat-head screwdriver
n Small needle nose pliers
n Pen or pencil
n ESD workstation or antistatic wrist strap (recommended)
Equipment Log
Use the equipment log form located at the end of this manual to record the
model and serial number of your system, all installed options, and any other
pertinent information specific to your system. You will need this information
when configuring your system.
Opening the Front Door
To open the front door (see "Front View with Front Door Opened" in Chapter
2.)
To Next Page
Loading...