NEC Express5800/120Lh Operation Manual for Microsoft®Windows Server™ 2003 x64 Editions
12
After installing the Windows Server 2003 x64 Editions, be sure to execute the local
information registry write file (ASIA.REG or EU.REG) and update the system by
following the steps below.
If the NEC difference module has not been downloaded, see "Downloading the NEC
Difference Module" in "Preparation for Installing the Windows Server 2003 x64
Editions", and download the module.
If you change the configuration of the system (by adding or removing
hardware or Operating system software components) or repair the
system, you must run the system update again.
1. Log on to the system with an account having an administrator authority (such as
administrator).
2. Execute one of the following according to the last character of the model number
of this device:
F: ASIA.REG
E: EU.REG
A message confirming writing appears. Select [Yes].
3. Execute
<storage-destination-folder-name>¥WINNT¥W2K3AMD¥UPDATE.VBS.
A setup message appears.
As operations are carried out according to the instructions in the messages
displayed on the screen, the [Restart Computer] dialog box is displayed.
4. Click [Restart Computer] to restart the system.
To Next Page
Loading...
Need help?
General
