Chapter 4 Web Configuration
28
Codec Settings
You can also configure the Codec priority, and RTP packet length through the web browser.
To configure Codec settings from the web browser:
1. Click Global SIP Settings, Codec Settings. The following screen will be displayed.
Note: These configurations need to be the same setting as the SV systems.
2. Using the dropdown lists update the Codec Priority.
3. Using the dropdown lists update the RTP Packet Length.
4. Click Submit to confirm your settings or Reset to cancel.
5. Once the “Codec Priority” is updated, a reboot is required before the phone settings take effect.
Other Settings
To set other Global SIP settings through the web browser:
1. Click Global SIP Settings, Other Settings. The following screen will be displayed.
2. Enter the Signaling Precedence (DSCP) value defined by RFC
3. Enter the Voice Precedence (DSCP) value defined by RFC
4. Enter the RFC2833 Payload Type value
5. Click Submit to save your settings or Reset to cancel.
To Next Page
Loading...
