NEC GT200 - For SV8500

Chapter 4 Web Configuration
30
2. To activate the account, choose the Enable option for Registration. Next, enter the information provided by your
ITSP or MIS in each field.
For SV8500
The following options are available:
 Send Register: Enable / Disable sending SIP account information, set to “Enable” on SV8500.
 Reg. ID: Input the registration ID, it is “Extension number” registered on SV8500
 Display Name: Input the user name. The user name is shown on the terminal display when the phone is
idle.
 Auth. Name: Input the Authentication Name used for authentication. It can be identical to or different from the
SIP Registration ID. It is “Extension number” registered on SV8500
 Password: Input the register password.
 Reg. Server: Input the registration server IP address, “(IP Address of SV8500): (port number)”, a port number
is necessary, and default value of SV8500 is “5060”
 Registration Server port: Input the registration server port
 Proxy Server: Input the proxy server IP address.
 Proxy Server Port: Input the proxy port number.
 Proxy Address: Input the outbound proxy server IP address.
 Proxy Address Port: Input the proxy port number
 Voice Mail: Input the number to dial the voice mail system.
Note: SRTP is not supported