Chapter 4 Web Configuration
31
SRTP: Select “Disable”, SRTP is not supported on SV8500.
Expire time: User can set the timeout duration for registration request, it should be “120” or more.
DTMF Type: Input the DTMF type options: RFC2833 / SIP INFO / In-Band, “SIP INFO” is recommended on
SV8500.
Retry Expire Time: User can set the timeout duration for registration failed retry request.
Send Keep Alive: On/Off. Typically enabled to instruct the phone to send SIP keep-alive message for
maintaining a “pinhole” in the user’s firewall through which SIP messages can pass.
MWI: Enable / Disable to ask server auto provide Message Waiting Indicator.
Subscribe Expire Time: User can set the timeout duration for subscribe request.
Status: Displays the status of the SIP Account.
For SV8300
The following options are available:
Send Register: Enable / Disable sending SIP account information, set to “Enable” on SV8300.
Reg. ID: Input the registration ID, it is “Extension number” registered on SV8300
Display Name: Input the user name. The user name is shown on the terminal display when the phone is
idle.
Auth. Name: Input the Authentication Name used for authentication. It can be identical to or different from the
SIP Registration ID. It is “Extension number” registered on SV8300
Password: Input the register password.
Reg. Server: Input the registration server IP address, “(IP Address of SV8300): (port number)”, a port number
is necessary, and default value of SV8300 is “5070”
Registration Server port: Input the registration server port
Proxy Server: Input the proxy server IP address.
Proxy Server Port: Input the proxy port number.
Proxy Address: Input the outbound proxy server IP address.
Proxy Address Port: Input the proxy port number
Voice Mail: Input the number to dial the voice mail system.
SRTP: Select “Disable”, SRTP is not supported on SV8300.
Expire time: User can set the timeout duration for registration request, it should be “120” or more.
DTMF Type: Input the DTMF type options: RFC2833 / In-Band
Retry Expire Time: User can set the timeout duration for registration failed retry request.
Send Keep Alive: On/Off. Typically enabled to instruct the phone to send SIP keep-alive message for
maintaining a “pinhole” in the user’s firewall through which SIP messages can pass.
MWI: Enable / Disable to ask server auto provide Message Waiting Indicator.
Subscribe Expire Time: User can set the timeout duration for subscribe request.
Status: Displays the status of the SIP Account.
For SV8100
The following options are available:
Send Register: Enable / Disable sending SIP account information, set to “Enable” on SV8100.
Reg. ID: Input the registration ID, it is “Extension number” registered on SV8100
Display Name: Input the user name. The user name is shown on the terminal display when the phone is
idle.
Auth. Name: Input the Authentication Name used for authentication. It can be identical to or different from the
SIP Registration ID. It is “Extension number” registered on SV8100
Password: Input the register password.
To Next Page
Loading...
