E-53
8. SPECIFICATIONS
8. SPECIFICATIONS
This section provides technical information about the HT510/HT410 Projector's performance.
Model Number HT510/HT410
Optical
DMD Single Chip Digital Micromirror Device (DMD)
Resolution HT510: 1024⳯576 pixels*
1
up to 1080i with scaling technology
HT410: 854⳯480 pixels*
1
up to 1080i with scaling technology
Lens Manual zoom and focus, manual lens shift
F2.0 - 2.48 f=19.5 mm - 23.0 mm
Lens shift: Vertical 0.5 V
Lamp 155W DC (124W Eco mode)
Image Size 30" - 200" diagonal (16:9)
Projection Distance HT510: 34.4" - 240.5" (wide) / 41.2" - 285.9" (tele)
0.87 m - 6.11 m (wide) / 1.05 m - 7.26 m (tele)
HT410: 41.73" - 289" (wide) / 50" - 343.3" (tele)
1.06 m - 7.34 m (wide) / 1.27 m - 8.72 m (tele)
Projection Angle
(Lowest Position)
*2
HT510: 6.4° - 6.7° (wide) / 5.5° - 5.7° (tele)
HT410: 6.4° - 6.7° (wide) / 5.4° - 5.6° (tele)
(Highest Position)
*3
HT510: 15.8° - 16.5° (wide) / 13.4° - 14.0° (tele)
HT410: 15.8° - 16.4° (wide) / 13.4° - 13.8° (tele)
Electrical
Inputs 1 VGA (D-Sub 15 Pin), 1 S-Video (DIN 4 Pin) Video (RCA), 1 Component (Y,
Cb/Pb, Cr/Pr), 1 Stereo Mini Audio, 1 Audio L/R (RCA), 1 PC Control (Mini DIN
8 Pin)
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, Component:1080i,
720p, 576p, 480p, 576i, 480i
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 85 Hz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL / YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: HT510: 1024 dots (H)⳯576 dots (V)
HT410: 854 dots (H)⳯480 dots (V)
External Control IR
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speaker 1W (Monaural)
Power Requirement 100 - 240V AC, 50 / 60 Hz
Input Current 2.2 - 1.1A
Power Consumption 204W (7.0W Standby)
*
1
Effective pixels are more than 99.99%
*
2
Lowest Position is the minimum lens shift position.
*
3
Highest Position is the maximum lens shift position.
To Next Page
Loading...
