NEC N331i - Setting the Date; Setting Date Format; Outgoing Call; Time & Date Setting

19
Outgoing call
☛
With the ALS setup screen displayed, press 1.
☛
Press the appropriate key for the required option.
Voice mail
☛
With the ALS setup screen displayed, press 2.
☛
Press the appropriate key for the required option.
Time & date setting
Your phone has the ability to store the time and date for two time zones: Home (Local time) or World (Remote time). This information is displayed in 12
or 24 hour format on the standby screen, and can be used to trigger an alarm and for scheduler.
☛
With the standby screen displayed, press 1, 1 and 5 before performing the following procedures.
Show clock
This option allows you to select the time that you prefer to display on the standby screen.
☛
Press 1 to display the Show clock screen.
☛
Press 1 to display local time only, or 2 for both local and remote times, or 3 for not displaying clock.
Setting the Local time and Remote time
☛
Press 2 to display the Set time screen.
☛
Press 1 to display the Local clock screen, or 2 to display the Remote clock screen.
☛
Key in the local/remote time for the time setting, then press Softkey 1.
Setting the date
☛
Press 3 to display the Set date screen.
☛
Key in the date, press Softkey 1 to save the changes.
Setting date format
☛
Press 4 to display the Set date format screen.
☛
Press the appropriate key for the desired date format.