NEC N331i - Mail Menu

55
Mail menu
This menu enables you to use the mail facility.
☛
With the standby screen displayed, press Softkey 1 to display the Mail screen.
2
You can also access the Mail screen by pressing 3, 2 and 2, or Softkey 2 and 2 from the standby screen.
2
The available options differ depending on the operators.
2
When an error has occurred in sending mail, it is saved in the Draft as unsent mail.
2
The same mail can be sent to up to five addresses.
2
If you wish to send saved mail, see Draft (page 62).
Compose mail
This option enables you to compose, send and save mail.
☛
With the Mail screen displayed, press 1.
☛
Use the ▲ and ▼ keys to highlight the To field, then press .
☛
Key in the required address, then press .
☛
Use the ▼ key to highlight the Subject field, then press .
☛
Key in the subject of the message, then press .
☛
Use the ▼ key to highlight the Message field, then press .
☛
Key in the required message, then press .
☛
Use the ▼ key to highlight the Attachment field, then press to display the My data screen.
☛
Select the desired file to be attached, then press to attach it.
/
See also: “My data” on page 75.
2
The file can be attached up to 100K bytes depending on the operators.
☛
Use the ▼ key to highlight the Send or Save, then press .
/
See also: “Text Entry” on page 31.
2
You can access the Message edit Options menu by pressing from the text entry screen (see page 41).
Editing a composed mail
☛
With the Compose mail or Edit mail screen displayed, press .
☛
Press the appropriate key for the required option.