NEC NP-PA703UL - Page 176

159
8. Appendix
Model name PA803UL/PA703UL/PA653UL
DisplayPort Video input DisplayPort × 1
Data rate: 5.4 Gbps/2.7Gbps/1.62Gbps
No. lanes: 1 lane/2 lanes/4 lanes
Color depth: 8 bits, 10bits, 12bits
Colorimetry: RGB, YCbCr444, YCbCr422, REC709, REC601
HDCP compatible
(*4)
Audio input DisplayPort: Sampling frequency – 32/44.1/48 kHz, Sampling bits – 16/20/24 bits
PC control terminal D-Sub 9-pin × 1
USB port USB type A × 1
Ethernet/LAN/HDBaseT port RJ-45 × 1, Supports 10BASE-T/100BASE-TX
Remote terminal Stereo mini jack × 1
3D SYNC output terminal 5 V / 10 mA, synchronized signal output for 3D use
Usage environment Operating temperature: 41 to 104°F (5 to 40°C)
(*5)
Operating humidity: 20 to 80% (with no condensation)
Storage temperature: 14 to 122°F (-10 to 50°C)
Storage humidity: 20 to 80% (with no condensation)
Operating altitude: 0 to 3650 m/12000 feet
(1700 to 3650 m/5500 to 12000 feet: Set [FAN MODE] to [HIGH ALUTITUDE])
Power supply 100-240 V AC, 50/60 Hz
Power con-
sumption
LIGHT
MODE
NORMAL PA803UL: 798 W (100-130 V AC) / 774 W (200-240 V AC)
PA703UL: 000 W (100-130 V AC) / 000 W (200-240 V AC)
PA653UL: 627 W (100-130 V AC) / 613 W (200-240 V AC)
ECO1 PA803UL: 604 W (100-130 V AC) / 592 W (200-240 V AC)
PA703UL: 000 W (100-130 V AC) / 000 W (200-240 V AC)
PA653UL: 580 W (100-130 V AC) / 566 W (200-240 V AC)
ECO2 PA803UL: 470 W (100-130 V AC) / 464 W (200-240 V AC)
PA703UL: 000 W (100-130 V AC) / 000 W (200-240 V AC)
PA653UL: 437 W (100-130 V AC) / 431 W (200-240 V AC)
LONG LIFE PA803UL: 285 W (100-130 V AC) / 285 W (200-240 V AC)
PA703UL: 000 W (100-130 V AC) / 000 W (200-240 V AC)
PA653UL: 276 W (100-130 V AC) / 276 W (200-240 V AC)
STANDBY Link-up 0.15 W (100-130 V AC) / 0.21 W (200-240 V AC)
Link-down 0.11 W (100-130 V AC) / 0.16 W (200-240 V AC)
Rated input current PA803UL: 11.8 A (100-130 V AC), 5.2 A (200-240 V AC)
PA703UL: 00.0 A (100-130 V AC), 0.0 A (200-240 V AC)
PA653UL: 10.2 A (100-130 V AC), 4.5 A (200-240 V AC)
Power cord specication 15 A or higher
(*6)
External dimensions (W × H × D) 22.8" (width) × 8.2" (height) × 19.5" (depth)/580 (width) × 208 (height) × 494 (depth)
mm (including protruding parts)
22.8" (width) × 8.1" (height) × 19.3" (depth)/580 (width) × 205 (height) × 490 (depth)
mm (not including protruding parts)
Weight 40.2 lbs/18.2 kg (not including lens)
*1 Effective pixels are more than 99.99%.
*2 Compliance with ISO21118-2012
*3 This is the light output value (lumens) mounting the lens unit, NP41ZL, when the [PRESET] mode is set to [HIGH-BRIGHT]. The
light output values will be dropped according to the setting of [LIGHT MODE]. If any other mode is selected as the [PRESET]
mode, the light output value may drop slightly.
*4 If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly. With
the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed
due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
Video: HDR, Deep Color, 8/10/12-bit, Lip Sync.
Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit
HDMI: Supports HDCP 2.2/1.4
DisplayPort: Supports HDCP 1.3
HDBaseT: Supports HDCP 2.2/1.4
*5 Depending on the altitude and temperature, the projector goes into “Forced ECO Mode” in the state [NORMAL] or [ECO1] has
been selected for [LIGHT MODE].
*6 In UK, use a BS-approved power cord with molded plug having a black (13 A) fuse installed for use with this projector.
• These specications and the product’s design are subject to change without notice.