53
3. Convenient Features
LENS CONTROL
• CONTROL
FOCUS CENTER Align the focus around the optical axis.
PERIPHERY Align the focus for the screen peripheral area.
ZOOM
◀/▶
Finely adjusting the size of an image.
SHIFT
▼▲◀▶
Adjust the projected image’s vertical and horizontal position.
HOME Return the lens shift position to the home position.
SHUTTER Turn off the light source temporarily.
SHUTTER
Turn on the light source.
CALIB. Correct the adjustable zoom, focus and les shift range.
• LENS MEMORY
STORE Store the current adjusted values in memory for each input signal.
MOVE Applies the adjusted values of LENS SHIFT, ZOOM, and FOCUS to the current
signal.
RESET Return the adjusted valued to the last condition.
• REF. LENS MEMORY
PROFILE1/PROFILE2 Select a stored [PROFILE] number.
STORE Store each adjusted value of LENS SHIFT, ZOOM and FOCUS for the selected
prole as the common values for every input signal.
MOVE Move the lens to the stored values for the selected prole.
RESET Reset selected [REF. LENS MEMORY] for the selected [PROFILE] to the default
factory settings.
To Next Page
Loading...
