NEC NP-PX700W - Page 159

145
5. Using On-Screen Menu
4. Select[SITESURVEY]andpresstheENTERbutton.
 The“SSID”listwillbedisplayed.
5. SelectaconnectingSSID,andthenselect[OK].
Finally press the ENTER button.
• SelecttheSSIDforwhichWPA-PSKorWPA2-PSKisset.
• Select[INFRASTRUCTURE( )] for [NETWORK TYPE]. WPA-PSK, WPA2-PSK, WPA-EAP, or WPA2-EAP is
not available when [AD HOC ( )] is selected.
6. Selectthe[SECURITY]tab.
 The[SECURITY]pagewillbedisplayed.
7. Selectthe[SECURITYTYPE]eldandpresstheENTERbutton.
The pull-down list will be displayed.
8. Select[WPA-EAP]or[WPA2-EAP]andpresstheENTERbutton.
9. Selectthe[TKIP/AES]eldandpresstheENTERbutton.
The pull-down list will be displayed.
10 .Select[TKIP]or[AES]andpresstheENTERbutton.
 Select[TKIP]or[AES]accordingtothesettingforyouraccesspoint.