NEC NP-PX700W - 11 Displaying a Picture Using [EDGE BLENDING]

49
3. Convenient Features
 Displaying a Picture Using [EDGE BLENDING]
TheEDGEBLENDINGfunctionallowsamulti-screenimagewithhighresolutiontobedisplayedonalargescreen.
Thisfunctionadjustsoverlappingedgesofimagesprojectedfromeachprojectortouniformmulti-screenimages.
NOTE:
• Forprojectorthrowdistances,referto“Throwdistanceandscreensize”onpage210, 211, 212, 213.
• BeforeperformingtheEdgeBlendingfunction,placetheprojectorinthecorrectpositionsothattheimagebecomessquarein
theappropriatesize,andthenmakeopticaladjustments(lensshift,focus,andzoom).
Before explaining use of the Edge Blending function
Thissectionexplainsthecasefor“Example:Placingtwoprojectorssidebyside”.Asshown,theprojectedimageon
theleftisreferredtoas“ProjectorA”andtheprojectedimageontherightisreferredto“ProjectorB”.Unlessotherwise
speciedhereinafter,the“projector”isusedtomeanbothAandB.
Example:Placingtwoprojectorssidebyside
Edge Blending area
Projected area
Projected area
Projector A Projector B
Preparation:
• Turnontheprojectoranddisplayasignal.
• Tousetwoormoreprojectors,youhavetoturnon[CONTROLID]fromthemenu.Formoreinformation,referto
“SettingIDtotheProjector[CONTROLID]”onpage124.
① Enable [EDGE BLENDING].
1 Select[SETUP]→[EDGEBLENDING]andpresstheENTERbutton.