NEC NP1250 - Page 27

27
4. Configuring the LAN Settings of the Projector
Configuring the LAN Settings of the Projector
4
17
Confirm the “ADVANCED” settings.
<1> Use the
SELECT  /
button to highlight [OK] and press the button.
The “WIRELESS” page is displayed again.
18
Reconnect to the network.
<1> Use the
SELECT  /
button to highlight “RECONNECT” and press the button.
19
Confirm the settings.
<1> Use the
SELECT  /
button to highlight [OK] and press the button.
The contents of the setting are stored in the memory of the projector.