26
4. Configuring the LAN Settings of the Projector
Input “KEY 1” to “KEY 4” (only when WEP is selected).
If “WEP (64BIT)” or “WEP (128BIT)” is selected from “SECURITY TYPE”, input an encryption key.
Set the same encryption key as the wireless access point and personal computer to be connected
by the wireless LAN.
Two types of keys can be input for SECURITY.
SECURITY TYPE
Alphanumeric Character
(ASCII)
Hexadecimal Number
(HEX)
WEP (64 BIT) 5 characters 10 characters
WEP (128 BIT) 13 characters 26 characters
<1> Use the
button to select an item for which the encryption key is to be input and
press the button.
The software keyboard is displayed.
<2> Use the
button, move the highlight to a character, and press the
button.
<3> Repeat step <2> above to input the encryption key.
The character is input.
• Each button on the software keyboard has the following function.
• “MODE” ...................Selects uppercase, lowercase, or special characters.
• “SP” .........................Inputs space.
• “BS” .........................Deletes one character to the left of the character insertion position
in the encryption key field.
• “ <<”“>>” ..................Move the character insertion position in the encryption key field to
the left or the right.
• “HEX” or “ASCII” .....Selects alphanumeric character input or hexadecimal number input.
• When “HEX” is displayed, alphanumeric characters (ASCII) can
be input.
• To input hexadecimal numbers, move the highlight to “HEX” and
press the button. “ASCII” will be displayed instead of
“HEX”, and hexadecimal numbers can be input.
• When hexadecimal numbers can be input, “0x” is automatically
displayed at the beginning of the input field.
• [OK] .........................Finalizes the input character and closes the software keyboard.
• [CANCEL] ............... Cancels the input character and closes the software keyboard.
To Next Page
Loading...
