NEC NP1250 - Page 25

25
4. Configuring the LAN Settings of the Projector
Configuring the LAN Settings of the Projector
4
13
Select “SECURITY” page (if necessary).
Proceed to step
17
if WEP, WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP is not set.
<1> Use the
SELECT  /
button to select the “CONNECTION” tab, and press the
button to highlight the “SECURITY” tab.
The “SECURITY” page is displayed.
14
Select “SECURITY TYPE”.
Selects whether or not to use security settings.
To use security settings, select the “SECURITY TYPE”.
DISABLE Encryption is not performed. There is a risk of transmitted data being
intercepted by a third party.
WEP(64BIT) Encryption is performed using WEP with a 64-bit long secret key.
WEP(128BIT) Encryption is performed using WEP with a 128-bit long secret key. This
offers enhanced security when compared to a 64-bit secret key.
WPA-PSK/WPA-EAP/
WPA2-PSK/WPA2-EAP
More secure than WEP type. For setting details, refer to “WPA Setting Guide”
on the User’s Manual CD-ROM.
15
Select “KEY SELECT” (only when WEP is selected).
If “WEP (64BIT)” or “WEP (128BIT)” is selected from “SECURITY TYPE”, select which of the following
encryption keys, “KEY 1” to “KEY 4”, is to be used.