NEC NP1250 - Page 24

24
4. Configuring the LAN Settings of the Projector
10
Input or edit “SSID” (if necessary).
SSID selected in “SITE SURVEY” are automatically input.
If the highlight is moved to the “SSID” field and the button is pressed, a software keyboard
is displayed and characters can be input or edited.
The default setting of the projectors is “NECPJ”.
11
Select “NETWORK TYPE” (if necessary).
The communication mode of the SSID selected in “SITE SURVEY” is automatically selected.
The settings can be changed by moving the highlight to the “NETWORK TYPE” field and pressing
the button.
• “INFRASTRUCTURE” ...This is selected if communication is performed with two or more devices
connected by wired or wireless LAN via a wireless access point.
• “AD HOC” ......................This is selected when using the wireless LAN to directly communicate
without a wireless access point.
Example of connection when Example of connection when
“NETWORK TYPE” is “INFRASTRUCTURE” “NETWORK TYPE” is “AD HOC”
Example of setting 2
12
Select “CHANNEL” (if necessary).
Select a channel for communication using wireless LAN.
If neighboring channel numbers are used in one area, the speed of wireless LAN communication
decelerates. To avoid such a situation, select channel numbers that are widely separated.
The factory default setting is “AUTOMATIC”.
LA
M
P
S
TATUS
POWER
O
N
/STAN
D
BY
SOURCE
A
UTO ADJUST
3D REF
ORM
SELEC
T
US
B
LENS
SH
I
FT
LE
FT
R
I
G
H
T
DO
WN
UP
WIRELESS
WIRELESS
LA
M
P
S
TATUS
POWER
O
N
/STAN
D
BY
SOURCE
A
UTO
ADJUS
T
3D REFORM
SELE
C
T
U
SB
LENS
SH
IFT
LE
F
T
R
I
G
H
T
DOW
N
UP
WIRELESS
WIRELESS
Wireless
Access
point
Wired LAN