NEC NP1250 - Page 23

23
4. Configuring the LAN Settings of the Projector
Configuring the LAN Settings of the Projector
4
The “ADVANCED” screen is displayed.
9
Select SSID from “SITE SURVEY” (if necessary).
A list of SSID that can be connected to by wireless LAN in the current location are displayed. Select
the SSID to connect to from within the list. When an SSID is selected from the list, the “SSID” field,
“TYPE” field and “CHANNEL” field will also be automatically set.
<1> Press the
SELECT 
button once to highlight “SITE SURVEY” and press the button.
The projector begins scanning for SSIDs.
When SSID scan is complete, a list of SSID is displayed.
Icon
............ Wireless access point ............. Personal computer (AD HOC)
........... WEP, WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP setting
<2> Use the
SELECT  /
button to highlight the SSID of the network to connect to.
Press the button once to highlight [OK] and press the button.
If the SSID you want to connect to is not on the list, press the
EXIT
button.
Note
To connect an SSID that has WEP, WPA-PSK, or other security settings, the same setting
must be made on the projector ( page 25).