NEC P452W - Page 133

122
8. Maintenance
7. Reattach the lamp cover.
(1)Slidethelampcoverbackuntilitsnapsintoplace.
a
b
(2) Tighten the screw to secure the lamp cover.
• Besuretotightenthescrew.
ThiscompletesthelampandFilter(B)replacement.
GoontotheFilter(A)replacement.
NOTE:Whenyoucontinuetousetheprojectorforanother100hoursafterthelamphasreachedtheendofitslife,theprojector
cannotturnonandthemenuisnotdisplayed.
Ifthishappens,presstheHELPbuttonontheremotecontrolfor10secondstoresetthelampclockbacktozero.
Whenthelamptimeclockisresettozero,theLAMPindicatorgoesout.
