NEC PA521U - Connect the Projector to a LAN

190
8. User Supportware
Connect the projector to a LAN.
ConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page169)and“9.
ControllingtheProjectorbyUsinganHTTPBrowser”(→page44)
Start Virtual Remote Tool
Start using the shortcut icon
• Double-clicktheshortcuticon on the Windows Desktop.
Start from the Start menu
• Click[Start]→[AllPrograms]or[Programs]→[NECProjectorUserSupportware]→[VirtualRemoteTool]
→[VirtualRemoteTool].
 WhenVirtualRemoteToolstartsforthersttime,“EasySetup”windowwillbedisplayed.
 The“EasySetup”featureisnotavailableonthismodel.Click“CloseEasySetup”.
 Closingthe“EasySetup”windowwilldisplaythe“ProjectorList”window.
 Selectyourprojectoryouwishtoconnect.ThiswilldisplaytheVirtualRemotescreen.
NOTE:
• When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonvianetworkconnection.
TIP:
• TheVirtualRemoteToolscreen(orToolbar)canbedisplayedwithoutdisplaying“EasySetup”window.
 Todoso,clicktoplaceacheckmarkfor“ DonotuseEasySetupnexttime”onthescreen.