SV8100 VM8000 InMail Programming Guide
Rev 8
9
6.2 Setting Up the System SMTP Options
47-18-01 Enable SMTP Email Delivery System Wide
47-18-02 Set SMTP Server Name
47-18-03 Set SMTP Server port, default is 25
47-18-04 If required by the email server, enable encryption
47-18-05 Set SMTP Server login user name
47-18-06 Set SMTP Server login password
47-18-07 Set system wide send from Email Address
47-18-08 Set system wide reply to Email Address. This is not a valid email address it is just used
in the email sent to the destination address.
Note: Google requires the Username be the entire email address, this applies to SMTP and POP3. Google
also requires Encryption/SSL be enabled.
6.3 Setting Up the System POP3 Options
47-19-01 Set POP3 Server Name
47-19-02 Set POP3 Server port, default is 110
47-19-03 If required by the email server, enable encryption
47-19-04 Set SMTP Server login user name
47-19-05 Set SMTP Server login password
To Next Page
Loading...
