NEC SV9100 Setup Guide

ii Table of Contents
Issue 1.0
1.2 Using an USB Drive ................................................................. 3-1
Section 2 Updating the UT880 System Firmware ................................... 3-2
Section 3 Defaulting the UT880 from the Desktop ................................. 3-3
Section 4 Defaulting the UT880 during Bootup ...................................... 3-3

NEC SV9100 Specifications

General

Unified Messaging	Yes
VoIP Support	Yes
SIP Support	Yes
VoIP Protocols	SIP, H.323
Mobility	Yes
Type	IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% (non-condensing)
System Type	Hybrid (Supports Analog, Digital, and IP)