Issue 2.00 UNIVERGE SV8100
4 - 4 Installation, Programming, and Maintenance Overview
SECTION 3 MAINTENANCE
Installing Interface Blades without Disrupting Ongoing Calls
Each interface and optional blade has an LED indication of power status. An
interface blade (except the CD-CP00) with this switch OFF can be removed or
installed with the system power on.
The combination of status indication and blade replacement with power on allows the
maintenance technician to replace suspect circuits without disrupting ongoing calls.
Up/Down Load of Data
Using PC Programming, Station Speed Dial data, System Speed Dial data, and all
System Data can be transferred from/to a PC. The Up/Down Load may be
accomplished from a local or remote location.
To Next Page
Loading...
