NEC Univerge SV8100 - Outside Line Types

UNIVERGE SV8100 Issue 2.00
Configuration Guide 5 - 13
 Operating Humidity: 10 ~ 90% RH (non-condensing)
 Recommended Long Term Humidity: 20 ~ 90% RH
Door Box
 Operating Temperature: -4°F ~ +104
o
F (-20
o
C ~ 60
o
C
 Operating Humidity: 20 ~ 80% (non-condensing)
SV8100 Power Supply – MPS7101
 Operating Temperature: +32°F ~ +104°F (0
o
C ~ +40
o
C)
 Recommended Long Term Temperature: -4°F ~ 167
o
F (-40
o
C ~ 75
o
C)
 Operating Humidity: 20 ~ 95% RH (non-condensing)
 Recommended Long Term Humidity: 10 ~ 95% RH
5.2 Outside Line Types
The following outside lines can be used with the UNIVERGE SV8100 system.
 4-wire, E&M Tie Lines (Type I or V, Dial Pulse, or DTMF)
 Digital Trunk T1/FT1 (Loop Start, Ground Start, Tie Line (E&M), or DID
Signaling)
 ISDN-BRI Trunks
 ISDN-PRI Trunks
 VoIP Trunks (Internet Protocols)