Issue 2.00 UNIVERGE SV8100
1 - 4 Introduction to UNIVERGE SV8100
SECTION 3 SV8100 DIGITAL AND IP MULTILINE TELEPHONE LINE UP
3.1 Modular Design
The UNIVERGE SV8100 offers an exciting line up of modular telephones.
This modular design allows the telephones to be upgraded and customized.
Optional LCD panels, dial pads, handset cradles, face plates and coloured
side panels can easily be snapped on and off to upgrade and customize as the
customer desires.
The easy-to-use adjustable footplate allows the customer to chose from a
variety of height positions that are right for them and their environment.
Only the DT300/DT700, D
term
Series i telephones, Aspire Model C, single line
telephones, cordless telephones and wireless telephones discussed in the
document can be installed on the SV8100 system.
Several easy-to-read LCD displays are available, including a new large colour
touch panel LCD.
Figure 1-3 UNIVERGE SV8100 Telephone Modular Design
To avoid damage to equipment, do not install the D
term
70 on
the SV8100 system. The D
term
70 (DTU/DTP) terminal uses
-24V and has no protection from the -48V power supply used
by the SV8100 system.
To Next Page
Loading...
