Issue 7.00
InMail System Guide 2 - 141
Setting Up POP3 Login
1. If yes:
47-18-05: SMTP AUTHENTICATION
To enable POP3 Authentication, enter 2.
3 By default, this option is disabled (0).
47-19-01: POP3 SERVER NAME
Enter the name of the POP3 server that will handle email delivery for
the installation site. The POP3 server name is typically similar to
pop.emailserver.com.
- If you didn’t make an entry in the 90-11-11 and 90-11-12
Domain Name options, this entry must be the IP address of the
POP3 server since there is no way to resolve a name.
3 By default, there is no entry for this option.
47-19-02: POP3 PORT NUMBER
Specify the port (logical connection) the installation site’s email server
uses for POP3. Normally, this is port 110.
3 By default, this option is 110.
47-19-03: POP3 ENCRYPTION METHOD
Enable or disable POP3 SSL encryption for the site's email server.
The option you choose depends on the requirements of the POP3 email
server.
3 By default, this option is disabled (0).
47-19-04: POP3 USERNAME
Enter the POP3 account’s user name. If the subscriber’s email
address is yourname@emailserver.com, the username would nor-
mally be yourname.
3 By default, there is no entry for this option.
47-19-05: POP3 PASSWORD
Enter the password for the account specified in the previous option.
When authentication is enabled, this password is required to log onto
the email account.
3 By default, there is no entry for this option.
2. If no:
47-18-05: SMTP AUTHENTICATION
To disable POP3 Authentication, enter either 0 (Authentication dis-
abled) or
1 (SMTP Authentication enabled).
3 By default, this option is disabled (0).
1. Does the site’s SMTP email server require POP3 Login?
To Next Page
Loading...
