NEC Univerge SV8100 - Page 306

Issue 7.00
2 - 298 Features
Direct Announcement Mailbox Routing
(If the outside caller routes directly to the Announcement Mailbox)
47-09-01 Next
Call
Routing
Mailbox
47-09-02
Repeat
Count
47-09-03
Hang Up
After
Action
Undefined 0 (No repeats)
0 = None
1 = Goodbye
2 = Silent
 If the caller doesn’t dial, after the
announcement InMail hangs up.
 If the caller dials a digit during the
announcement, InMail says “That is an
invalid entry” and hangs up.
1~32 (valid
Call Routing
Mailbox)
0 (No repeats)
0 = None
1 = Goodbye
2 = Silent
 If the caller doesn’t dial, after the
announcement they route to the Next Call
Routing Mailbox.
 If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
0 = None
1 = Goodbye
2 = Silent
 If the caller doesn’t dial, after the
announcement InMail hangs up.
 If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
Undefined x (x number of
repeats)
0 = None
1 = Goodbye
2 = Silent
 If caller doesn’t dial, they hear the
announcement x number of times and
then InMail hangs up.
 If the caller dials a digit during the
announcement, InMail says “That is an
invalid entry” and aborts the
announcement. The announcement
repeats (if allowed by the Repeat Count)
and then InMail hangs up.
1~32 (valid
Call Routing
Mailbox)
x (x number of
repeats)
0 = None
1 = Goodbye
2 = Silent
 If caller doesn’t dial, they hear the
announcement x number of times and
then route to the Next Call Routing
Mailbox.
 If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
0 = None
1 = Goodbye
2 = Silent
 If caller doesn’t dial, they hear the
announcement x number of times and
then InMail hangs up.
 If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.