NEC Univerge SV8100 - Page 322

Issue 7.00
2 - 314 Features
Programming
1. Optionally set up a Quick Message with Greeting (REC1) Action.
 47-13-01 Dial Action Tables: REC1 Action - Quick Message With Greeting (3)
(REC1)
To have the caller leave a Quick Message at a specific extension, the
corresponding Number option should be the extension number.
To have the caller leave a Quick Message at any caller-dialed extension,
the corresponding Number option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a
specific range, the corresponding Number option should be XXX.
 For example, to allow callers to leave a Quick Message extensions
200~299, for key 3 enter REC1 for the Action and XXX for the
corresponding Number.
. By default, key * Action is REC1 and Number is IXXX.
2. Optionally set up a Quick Message without Greeting (REC2) Action.
 47-13-01 Dial Action Tables: REC2 Action - Quick Message Without Greeting (4)
(REC2)
To have the caller leave a Quick Message at a specific extension, the
corresponding Number option should be the extension number.
To have the caller leave a Quick Message at any caller-dialed extension,
the corresponding Number option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a
specific range, the corresponding Number option should be XXX.
 For example, to allow callers to leave a Quick Message extensions
200~299, for key 3 enter REC2 for the Action and XXX for the
corresponding Number.
. By default, key * Action is REC1 and Number is IXXX.
3. Set the maximum message length for callers leaving a Quick Message in a
mailbox.
 47-01-04 Non-Subscriber Message Length (Mbox Msg Length)
Set the maximum length (1~4095 seconds) of recorded messages for:
 Automated Attendant callers leaving a message or Quick Message in a
Subscriber Mailbox.
 Outside callers transferred by an extension user to a Subscriber Mailbox.
. By default, this option is 120 seconds.