Issue 7.00
InMail System Guide 3 - 387
Message Length on page 2-267
Options
1~60 Seconds.
Default
5 Seconds.
47-01-06 Fax Extension
Use this option to specify which system extension is the fax machine. When
the Automated Attendant answers a call and detects fax (CNG) tone, it
automatically transfers the call to this extension.
. See Fax Detection on page 2-151 for more.
Options
No entry (Press Hold to clear).
Extension number (e.g., 310).
Default
No entry (Press Hold to clear).
47-01-07 Digital Pager Callback Number (Pager CBack)
Use this option to set the Digital Pager Callback Number portion of the
Message Notification callout number for a digital pager. This is the portion of
the callout number that is appended to the pager service telephone number.
Normally, this option is X*M#, where:
X is the number of the extension that generated the notification.
* is a visual delimiter (to make the pager display easier to read).
M is the number of new messages in the extension’s mailbox.
# is the digit normally used by the pager service for positive disconnect.
. Note: this option is not available in Europe.
. See Message Notification on page 2-271 for more.
Options
Digits (12 maximum, using 0~9, # and *)
M (Number of messages - entered by pressing LK1)
No entry (Entered by pressing Hold)
X (Extension number - entered by pressing LK2)
InMail automatically replaces the X command with the number of the
extension that initially received the message.
Default
X*M#
To Next Page
Loading...
